Non-Driveable Posts O.F.M. Posts may be supplied with a 25mm hole to suit an anchor rod in a transverse horizontal position. to resist extraction.
	Driveable Posts OF.M. Posts are available with a tongue to resist extraction, the bottom end being square cut (see drawing) or pointed (not illustrate to order to assist driving -being ideal for temporary locations.

Retro - Reflective

If specified each post can be supplied with two retro-reflective surfaces, one red and one white, to the dimensions required.

The retro-reflective materials complies with the requirements of AS 1906—part 1 for class 1A materials.

Alternatively, if ordered, O.F.M. Posts can be supplied with Disc Base Formed “seating” for corner Cube Type Delineator.

Dimensions a) Width: O.F.M.’s have a minimum width of 105mm facing traffic over the entire length. b) Length: O.F.M.’s are supplied + or - 2.5mm of the length specified by an Authority. Stock Lengths: 1.4 meters or length to order. c) Thickness: 4mm stock size.

Anchor Rod 140mm X 25mm PVC Providing maximum Retention capability

Additional Options (Ex Factory)

• Disk Base Forming - For Corner Cube Delineator Mounting.
• Disk Hole Drilled - For Corner Cube Delineator Fixing.
• Anchor Rod - Retaining Device.
• Tongue Formed - To Restrict Extraction Of Driveable Posts.
• End Pointing - To Assist Driveability.
• Identy Marking - To Your Requirements.
• Reflective Tape - Red, White Or Colour And Class To Specification.